Hangar doors NM 180

Those doors are manufactured with a thickness of 180 mm. Depending on the customer s desired configuration, the gate can be manufactured with additional layers of insulation to make doors usable in a high wind loads and regions with low temperatures  or in uncomfortable and tough conditions.

The exceptional feature of the hangar doors Neva Masters - is an opportunity to cover without size restrictions. The most relevant model solution for cover aircraft hangars called "target model", which allows you to create a step by step configuration of the opening. This achieves a reduction in costly financial component, ie gate cost, comfort of use, possibility to open any of many sections, which reduces heat loss during the cold period, as well as the mass of the structure itself.

Hangar doors are made of 180 Nm of several layers of cloth, which is going up when you open them, leaving as a free doorway. However, while such gate lifting during installation "eat" part of the free space above the gate opening. To avoid this, the hangar doors can be installed together with the collecting plate inside or outside the building. Strong vertical supports allows us not to limit the area of using  Neva Master doors. In addition, the hangar doors can be manufactured without supports. In this case, their width and length will depend on the width of the horizontal support:

180 mm: - max width 16m and max height 20 m

310 mm: - max width 30m and max height 25 m

Hangar  doors are made of PVC fabric, which handles against mold and ultraviolet light. Doors are fire protected. Light weight 820-950 g / m ? and a high tensile strength 350/300 N can install overhead sectional doors in all garages or sheds. Cloth flexibly 3000 N / 5 cm (about 12 kN / m door) and can withstand temperatures from +70 to -40 degrees (using a frost cloth to -60 degrees).

Industrial hangar doors have a steel body with special sections surfaced. At the lower beam is the rubber pressure roller, the remaining elements are made of aluminum, nylon or stainless steel.

Automatic hangar doors are equipped with an electric motor type IP54 with an operating voltage of 380 V control voltage 24 V. The motor draws power to 1 kW at 400 Nm.

The work of hangar doors lifting racks

Hangar doors Neva Masters can be produced in accordance with any standard size. This is possible because of using special type supports which design allows the blade to expand and increase its height, without losing the quality and reliability of the gate.

Often a company or organization who orders the production of hangar door, wants to paint them in the corporate colors or color matched to the existing buildings (hangars, warehouses, etc.). Realising such an order is not always easy because the hangar doors are require careful selection of color to other elements of the building.

Neva Masters company offers services in manufacturing and painting hangar doors in any color according to the international table of colors RAL. A special coating technology provides maximum durability and longevity of color. In addition to a monochromatic color, we also produce doors, painted in different colors, drawing figures, the arrangement of colored bands in a certain sequence. Table for selection of colors can be found in the relevant section on our website.